Drone taught to ride on a wheel to save energy

Hong Kong engineers assembled a bicopter with a passive wheel at the bottom of the hull. This allows it to lean on the wheel and roll on the floor, guided by the tilt screws. In this position, the drone consumes 61 percent less energy than in flight. The article was presented at the IROS 2020 conference, and its preprint was published on arXiv.org.

Drones have an undeniable advantage over wheeled robots in their versatility: they can move both in a plane close to the surface and rise to fly around obstacles. But in flight, they consume much more energy than wheeled and even walking robots. To combine the advantages of flying drones and driving robots, there are two approaches: to make a universal device or two separate ones, optimized for your tasks. General purpose drones with wheels usually have full four wheels with separate motors and sometimes pivoting mechanisms. This increases the mass of the robot and significantly affects its flight time and payload mass.

Engineers led by Youming Qin of the University of Hong Kong have developed a bicopter with one small passive wheel that controls the ride with the same propellers that allow it to fly. The drone uses two motors with propellers that are attached to the pivot mechanism. This allows the propellers to be independently tilted away from the longitudinal axis, which, for example, is necessary to rotate the drone. The total weight of the drone is 1950 grams. In addition to the main components, it includes a 500-gram lidar mock-up, because initially the engineers created the drone for drawing high-precision maps of the premises in flight.

Comments are closed.